SynthEdit and the SynthEdit logo are the property of Jeff McClintock
CK_Separates Section
**NOTE** This section is a selection of modules available to buy Separately (hence the name)It is Not a Pack - i may add new modules to this section which you would have to buy separately
To use these modules you must have a Registered Version of SynthEdit Ver:1.016 or Higher
You will also need to supply the following information to 'Authorise' the modules to you
A) Your proper name
B) Your SynthEdit Registration Name (*exactly as it appears in SynthEdit)
You can supply this information with your PayPal payment or separately by email
** SPECIAL OFFER **
| Buy All *Currently available(*) CK_Separates modules (normally £80 GBP) for £38 GBP |
** NEW Polyphony Control and Voice_Stealing Click Remover **
| £6 GBP |
This system allows End-Users to set the Maximum Polyphony setting from within the Synth/VST
Having a flexible Polyphony system also allows End-Users to adjust the amount of CPU your Synth/VST will use
Also, Voice_Stealing Clicks are removed !
An example .se1 prefab is provided
** NEW Pattern Playlist Sequencing **
 |
£3 GBP |
Pattern_Playlist Sequencing For use with CK_Midi_Note_Sequencers (*See Below)
Allows you to define a Playlist of patterns to play in sequence
Up to 50 Steps which can each repeat up to 16 times
An example .se1 prefab is provided
** NEW Sample_Recorder **
 |
£4 GBP |
Record/Trigger: Triggers sample recording
Mono/Stereo Mode: (MonoL, MonoR, Mono Sum(L+R), Stereo) Specify which Audio channels to record
Sample Filename: Sets the sample filename to create
Sample Resolution: (16 bit, 24 bit, 32 bit, 32bit(float)) The supported recording formats
Record Time(s): Sets the recording time depending on the Record Mode
Record Mode: (Dynamic, Max Time, Trigger)
Dynamic: Keeps recording while the 'Record/Trigger' input is High (*Record Time is ignored)
Max Time: Records up to the 'Record Time' setting while the 'Record/Trigger' input is High
Trigger: Records a fixed length sample when Triggered
 |
£3 GBP |
Ideal for Portamento or other 'blending/morphing' signal control etc:
Rise/Fall (ms): Allows different glide rates for Rising(Attack) and Falling(Decay)
Glide System: Linear or Non_Linear transition
Linear Mode: (Rate,Time) Linear Gliding can use Rate or Time(constant) gliding methods
Rate: Portamento Chord Notes will end at different times depending on how far they glide
Time: Portamento Chord Notes will always take the same glide time irrespective
Output Mode: (+/-, +/+) +/+ causes the output to be Positive
Glide Active: (Off/On) When Off the input is passed to output depending on the Output Mode
Reset Level: Changing this setting can cause a Level reset and glide to the Input level
Reset Level Mode: (Change, Active)
Change: The Level will reset each time the Level setting is changed
Active: The Level will only reset to the 'Reset Level' when Active is turned ON
An example Full 'Glide_Portamento_System' supporting 'Chord' and 'Note' modes is provided*
(*)Requires CK_Pitch_Latch(Pack6), i can provide that module if you need it - let me know when ordering
 |
£3 GBP(*) |
This module is an extension of the one in CK_Pack2
Start, End: Allows you to playback Whole or Sections of sequencer patterns
Mode: Step counting modes:- Fwd, Back, Fwd+Back, Back+Fwd, Random
Reset(to): Jump to any location (Start-End) in the pattern - allows offset starts or interactive user control
New Features:-
Step: Allows great variation for Sequencer/Pattern playback
Humanise: Applies random timing variation up to the specified amount (ms)
Shift/Delay: Shifts or delays the timing by the specified amount (ms)
(*)This module is included free with any GUI_Midi_32/64_Note_Sequencers *See Below*
** NEW Counter_Index with Groove Timing **
 |
All 3 modules for £4 GBP |
These modules allow you to apply Live end-user 'Groove' timing control to your sequencer
Start, End: Allows you to playback Whole or Sections of sequencer patterns
Mode: Step counting modes:- Fwd, Back, Fwd+Back, Back+Fwd, Random
Reset(to): Jump to any location (Start-End) in the pattern - allows offset starts or interactive user control
Step: Allows great variation for Sequencer/Pattern playback
Humanise: Applies random timing variation up to the specified amount (ms)
Delay: Delays the timing by the specified amount (ms)
Groove Mode: (OFF, Sequence, Clock) Controls how the Groove timings are applied
Sequence: Timings are tied to the Sequence Index/Count (i.e Groove_Shift #1 - #1)
Clock: Timings are cycled on each input Pulse/Clock
Groove 'Clock Mode' Wrap: (2,4,8,16,32,64) Sets the cycle limit when 'Groove Mode= Clock'
Groove Depth(%): Allows you to vary the Groove effect
Tempo Ref: This is used to determine the 'Beat' time for Groove_Shift
Groove Shift(1-16) Amount of Groove shift in 'Beats'
*Experts Note: Advance timing can be achieved with 'CK_Super_Clock'(pack8) modules and adjusting the Groove_Shifts accordingly
GUI Midi Note Sequencers (Table) with Internal User Patterns
** NEW Grid Editing window, Gate Adjust controls, GDI+ Graphics**
 |
£6 GBP |
**NEW** GDI+ graphics providing Alpha (blending) and Colour Gradients (shading)
GUI_Midi_32_Note_Sequencer:
8 Independent Sequencer Engines (Can allow polyphonic sequences by overlaying patterns)
64 User Preset Patterns (up to 32 notes per pattern)
Each Note has independent Velocity, Gate time, Channel and Output (output can be over-ridden)
Interactive 'Pop-Up' menu pattern editing system - requires minimal VST Panel space
Patterns can also be 'played in' (step time) by external Midi input or Graphical Keyboard
Note/Step information is displayed as it is 'played in'
**New option** 'Midi Record Mode' allows Step mode or Position/Next_Pos 'play in' recording
** NEW Editing Window **
Note information is displayed in the top 'info' bar as you move the mouse around
Simply click on the window to set Notes - Click on a Note to edit Note parameters (Vel,Gate,Delete etc)
Click on the 'info' bar to Change or Copy Patterns
Click " -+<>^v-+ " icons for Scroll and Zoom functions
Depending on how you use this module you can either have 64 User Patterns per Synth or per Patch
*Comes with CK_Counter_IndexingV2 module and Example .SE1 file
|
£8 GBP |
GUI_Midi_64_Note_Sequencer:
8 Independent Sequencer Engines (Can allow polyphonic sequences by overlaying patterns)
64 User Preset Patterns (up to 64 notes per pattern)
Each Note has independent Velocity, Gate time, Channel and Output (output can be over-ridden)
Interactive 'Pop-Up' menu pattern editing system - requires minimal VST Panel space
Patterns can also be 'played in' (step time) by external Midi input or Graphical Keyboard
Note/Step information is displayed as it is 'played in'
**New option** 'Midi Record Mode' allows Step mode or Position/Next_Pos 'play in' recording
** NEW Editing Window **
Note information is displayed in the top 'info' bar as you move the mouse around
Simply click on the window to set Notes - Click on a Note to edit Note parameters (Vel,Gate,Delete etc)
Click on the 'info' bar to Change or Copy Patterns
Click " -+<>^v-+ " icons for Scroll and Zoom functions
Depending on how you use this module you can either have 64 User Patterns per Synth or per Patch
*Comes with CK_Counter_IndexingV2 module and Example .SE1 file
 |
£4 GBP |
GUI_Midi_Note_Remapper: ** NEW UPDATED **
3 User Key Maps and OFF
Remaps Notes to other Notes with independent Channel and Output
Ideal for mapping Notes to Samples or for Splitting/Zoning areas for different keyboards etc
*New* Three Editing methods:-
A) Interactive 'Pop-Up' menu system - requires minimal VST Panel space
B) GUI Window editing (shown above): Simply 'Click and Drag' up/down to change the settings
C) Notes can also be mapped by 'playing in' by external Midi input or Graphical Keyboard
First note is Source, second Note is destination/mapped Note which is displayed as it is 'played in'
Depending on how you use this module you can either have 3 Key Maps per Synth or per Patch
**See Also: Midi_4x_Zone(Pack1) and Midi_8x_Zone(Pack5) for crossfading(via velocity)/overlayed keyboard zones
GUI 16 Levels with Morphing and Internal User Presets
 |
All 4 modules for £6 GBP GDI+ graphics  |
GUI_Multi_Levels_16_Morph: CPU: 'Blip' / 0.340% (max all 16 levels morphing)
16 GUI editable Levels plus Internal User definable Presets
Four versions supplied:- 1, 8, 32 and 128 User Presets
The 1 Preset version will morph levels on Patch changes
The 8, 32 and 128 Preset versions will morph levels on both Patch and Preset changes and
can be used polyphonically for 'sequenced' morph level changing (eg with CK_Counter_Indexing control)
Highlight options allow the edited level *and* a specified level to be highlighted eg for animating Sequencer position use
More User Presets requires more resources, so use the one which is suitable for your application
Depending on how you use these modules you can have multiple User Presets per Synth or per Patch
GUI 64 Levels with Morphing and Internal User Presets
 |
All 4 modules for £6 GBP GDI+ graphics |
GUI_Multi_Levels_64_Morph: CPU: 'Blip' / 1.440% (max all 64 levels morphing)
64 GUI editable Levels plus Internal User definable Presets
Four versions supplied:- 1, 8, 32 and 128 User Presets
The 1 Preset version will morph levels on Patch changes
The 8, 32 and 128 Preset versions will morph levels on both Patch and Preset changes and
can be used polyphonically for 'sequenced' morph level changing (eg with CK_Counter_Indexing control)
Highlight options allow the edited level *and* a specified level to be highlighted eg for animating Sequencer position use
More User Presets requires more resources, so use the one which is suitable for your application
Depending on how you use these modules you can have multiple User Presets per Synth or per Patch
Morphing and Internal User Presets for GUI Sub-Controls (float)
 |
All 4 modules for £6 GBP GDI+ graphics |
GUI_Ext_Multi_Levels_16_Morph: CPU: 'Blip' / 0.340% (max all 16 levels morphing)
These modules allow signal Morphing and Internal User Presets for your GUI Sub-Controls (float)
Depending on how you use these modules you can have multiple User Presets per Synth or per Patch
16 GUI Levels, editable via Window OR individual external Sub-Controls (float)
Display can be turned OFF if relying solely on external Sub-Control level setting
Four versions supplied:- 1, 8, 32 and 128 Internal User Presets
The 1 Preset version will morph levels on Patch changes
The 8, 32 and 128 Preset versions will morph levels on both Patch and Preset changes and
can be used polyphonically for 'sequenced' morph level changing (eg with CK_Counter_Indexing control)
Highlight options allow the edited level *and* a specified level to be highlighted eg for animating Sequencer position use
More User Presets requires more resources, so use the one which is suitable for your application
GUI 1-8 Stage Envelope ** New GDI+ Graphics **
 |
£5 GBP |
**NEW** GDI+ graphics providing Alpha (blending), Antialiasing (smoothing) and Colour Gradients (shading)
GUI_EnvelopeV2_8: **NOTE: THIS IS THE SAME MODULE AS IN PACK 8 **
GUI editable 1-8 stage envelope
For detailed information on the various controls see Envelopes in Pack 8
16 and 32 stage versions are also available in Pack 8
**New option** 'Level Scaler (latched)' Adjusts the output level of the envelope
GUI Envelopes with Internal User Presets ** New GDI+ Graphics **
 |
Both modules for £7 GBP |
**NEW** GDI+ graphics providing Alpha (blending), Antialiasing (smoothing) and Colour Gradients (shading)
GUI_EnvelopeV2_8_x8/x32: GUI editable 1 to 8 stage(9 point) envelope with x8/x32 User definable presets
Depending on how you use these modules you can either have x8/x32 User presets per Synth or per Patch
For detailed information on the various controls see Envelopes in Pack8/Pack9
A GUI_EnvelopeV2_8_x128 (8 Stage, 128 User Presets) version is available in CK_Pack9
More User Presets requires more resources, so use the one which is suitable for your application
**New option** 'Level Scaler (latched)' Adjusts the output level of the envelope
 |
All 3 modules for £9 GBP |
**NEW** GDI+ graphics providing Alpha (blending), Antialiasing (smoothing) and Colour Gradients (shading)
GUI_EnvelopeV2_32_x8/x32/x128: GUI editable 1 to 32 stage(33 point) envelope with User definable presets
Depending on how you use this module you can either have multiple User presets per Synth or per Patch
For detailed information on the various controls see Envelopes in Pack8/Pack9
More User Presets requires more resources, so use the one which is suitable for your application
**New option** 'Level Scaler (latched)' Adjusts the output level of the envelope
| Back |