 |
CK_PACK 3 ContentsTo use these modules you need a Registered Version of SynthEdit Ver:1.017+Guide CPU readings from Intel Pentium4 1.5Ghz For details on CPU readings and comparing with other systems/modules see:- CPU Guide |
Signal Processing |
 Multi_Pan 8: CPU 0.280% / 0.370%(typ) (All 8 active) Operates like a Multi Channel Mixer Independent 8x Mono->Stereo Volume - 2 modes Pan - 6 modes |
 Quad_Panner: CPU 0.135% / 0.155%(Balanced) : 0.200%(Weighted) 1 input to 4 output (eg surround) Volume - 2 modes F/B, L/R position Balanced and Weighted Pan modes Ideal for SE_Joystick panning control |
 Quad_Mixer: CPU 0.090% / 0.150%(Balanced) : 0.185%(Weighted) 4 inputs to 1 output: Ideal with SE_Joystick vector control Volume - 2 modes F/B, L/R position Balanced and Weighted Mix modes |
Utility |
 12x_Choice_to_1_Plus: CPU 0.150% / 0.235% (All 12 Active + Limit=On) Independent 12x Source Multi-Choice switch with Level controls PLUS output range limiting Create your list of 'choice' signals by linking to the 'Add Signal' (just like the SE_Switch modules) |
 12x_Choice_to_12: CPU 0.280% / 0.290% (All 12 active) Independent 12x Source Multi-Choice switch with Level controls to 12 Destinations |
 16x_Choice_to_1_Plus: CPU 0.190% / 0.280% (All 16 Active + Limit=On) Independent 16x Source Multi-Choice switch with Level controls PLUS output range limiting |
 16x_Choice_to_16: CPU 0.350% / 0.370% (All 16 active) Independent 16x Source Multi-Choice switch with Level controls to 16 Destinations |
 Unison_Detune_Plus Detunes voices in Unison - 4 modes PLUS Unison Voice ID outputs: which allows auto control of Switch/Choice modules ** For use with 'Note_Mem_Hold_Unison' module (Pack 2)** |
 Host_Position: CPU 0.080% to 0.150% (All outputs used) Provides Host sequence location Bar, Beat, Beat Fraction, Time(s) Tempo/Bpm Playback Status Bar and Beat Accuracy is usually within 2ms Less CPU is required if fewer outputs are connected Host_Position2: CPU 0.300% (All outputs used) Provides *Sample Accurate* Host sequence location Bar, Beat, Beat Fraction, Time(s) Tempo/Bpm Playback Status |
 Economy Mode: CPU 0.075%(Realtime) : 0.150%(Block Status) Option to Convert Realtime Modulation signals to Economy modulation signals uses less CPU on most downstream modules Modes: Off, Realtime, Realtime/Detect_Static, Block/Status, Block/Stream, Step |
 Measure_Time: CPU 0.005% Outputs the time a signal was Non-Zero or Streaming 3 modes (s),(ms), samples |
 Tap_Tempo Set Tempo via Midi Note or CC# tapping All Notes, Single Note or any CC# Features Drop-out protection and updates Host *if supported by Host* |
 Prime_Numbers_1-2000 Select up to 16 indepedent Prime Numbers from 1 to 2000 (*Prime numbers are recommended for Delay times for Reverb etc) Prime_Numbers_1-10000: As above but has Prime Numbers from 1 to 10000 |
Filters |
 SVar_Filter_Multi: CPU: 0.160% (Single output) : 0.230% (All outputs linked) State Variable Filter: Independent simultaneous outputs Cutoff(coeff) Res(resonance) Active switch Outputs: Lpf, Hpf, Bpf, Notch, PeakA, PeakB |
 SVar_Filter_Choice: CPU 0.160% / 0.160% State Variable Filter: Single filter choice output Cutoff(coeff) Res(resonance) Active switch Choice of:- Lpf, Hpf, Bpf, Notch, PeakA, PeakB, Bypass, Off *Example SE1 file shows how to set up the SVar_Filters for 1v/Khz or 1v/Oct operation if necessary Alternately, direct Cutoff(Coeff 0-10v) is ideal for synths *Note: 'Pitch_to_SVar_Cutoff' (Pack 5) can also be used to set the Cutoff frequency |
Audio Oscillators |
 Spectral_Osc_8: CPU 0.550% / 0.820% Audio Oscillator allowing Realtime Spectral Modulation Generates the first 8 harmonic series Pitch (Oct,Khz,Hz - 64bit precision) Phase Sync (Hard) Independent Spectral (harmonic) levels User defined Frequency Limiting (removes harmonics above the defined Frequency) Frequency Limiting On/Off option (Off, allows freq foldback for wierd FX) Active Harmonics: Limits the number of harmonics in the waveform can be used as a simple filter by removing high harmonics Quality: Normal/High |
Modulation Source Oscillators |
 Chorus_Driver_6: CPU 0.310% (typ) Provides Modulation Driver signals for Chorus Engine modules etc. Same Pitch(Oct,Khz,Hz - 64bit precision) Sync Independent phase Waveform1-6 (6 types:- Sine, Tri, Peak, Dip, Hump, Noise) |
 Pitch_Strobe2: CPU 0.180% / 0.330% Provides 3 modulation signals (2x Ramp, Tri) in the correct phase relationship for a 'Windowing Pitch Shifter' system Pitch (Oct,Khz,Hz - 64bit precision) Sync Phase(Setting) |
 Strobe2: CPU 0.110% / 0.220% Provides modulation signals(Ramp and Saw) for Data/Window Strobing duties Pitch (Oct,Khz,Hz - 64bit precision) Sync Phase(Setting) |
Delay and Effects |
 Comb_Dly: CPU 0.125% / 0.180% Front-Side Out Comb Delay Output = Input + Feedback signal Time(s,ms,samples) *Note: Standard (Back-Side Out) Comb Delay is just a normal Delay! |
 Comb_Dly_Damp: CPU 0.160% / 0.230% As above with Feedback Damping |
 AllPass_Dly: CPU 0.140% / 0.215% AllPass delay: Time(s,ms,samples) |
 AllPass_Dly_Damp: CPU 0.190% / 0.250% As above with Feedback Damping |
 6v_Chorus: CPU 0.680% 6 Voice chorus engine 6x Pre_Delay(s,ms) external Modulation drivers inputs Master Depth Voice 1 feedback - 2 modes Independent voice outputs |
 Stereo_Echos_10: CPU 0.390% Typ(50ms Spread) : 0.560% (2000ms Spread) Mono to Stereo Echo generator For creating really complex echo patterns Independent Volume - 2 modes Pan Delay Time(s,ms,samples) Master Time Adjust 4 Feedback & Damping modes |
 Stereo_Echos_20: CPU 0.560% Typ(50ms Spread) : 0.970% (2000ms Spread) As above with 20 echo points |
MIDI |
 Midi_32_Note_Table Independent Note# Velocity Gate time Transpose TempoRef Use with 'Counter_Indexing' (Pack 2) for Sequencer use Use with 'Volt_to_Index' (Pack 2) for other types of use |
 Midi_Chords_Active Interactive Chord System Live selection between 12 chord types which can be played anywhere on the keyboard Over 60 preset chord Types (Maj, Minor, Aug, Sus2 etc) + 12 User definable Strum and Velocity scatter (humanise) Chord Inversion and Strumming options Time, Direction Specify Notes to change Chord, Strumming or Inversion modes during Live performance Velocity 1-32: Sets the Velocity of each note in the Chord Text outputs indicate current settings when linked to a 'Text Display' module |
 Midi_Chords_Preset Preset Chord System: Define up to 12 Keyboard notes that playback Chords With Same options as Chords_Active shown above - independent per each note chord |
 Midi_Note_At_Release Triggers a note when another is released Active Zone Tranpose Velocity-2 modes Gate modes: Match, Defined |
 Midi_NoteON_Gap_Time Outputs the time between notes Active Zone Modes: Each Note,Toggle Time(s),(ms) or samples |
Specialist Modules |
 Reflections_10: CPU 0.310% Typ(50ms Spread) / (Interpolated: 0.480% / 1.130% (All Time+Vol Mod)) Inline reflections (ER) Fully flexible Realtime modulation system Independent Volume - 2 modes Time(s,ms,samples) Master Time Adjust 4 Feedback & Damping modes |
 Reflections_20: CPU 0.440% Typ(50ms Spread) / (Interpolated: 0.780% / 2.250% (All Time+Vol Mod)) As above with 20 reflection Taps **See CK_Pack2 Notes on Reflections vs Early_Reflections modules |
 Early_Reflections_10: CPU 0.290% (sample) Typ(50ms Spread) Dedicated Early(and Late) Reflections mono Independent Volume - 2 modes Time(s,ms,samples) Master Time Adjust Master Volume Adjust 4 Feedback & Damping modes |
 Early_Reflections_20: CPU 0.440% (sample) Typ(50ms Spread) As above with 20 reflection Taps **See CK_Pack2 Notes on Reflections vs Early_Reflections modules |
Parallel or Cascaded Delay / Resonator BanksE.g. Used in Reverb Systems for Constant or Decreasing Density over timeOr as independent 'Resonators' *See Structure/Signal flow diagram below* |
All Delay Bank systems now support Fractional Delay and Realtime Fractional Delay modulation Standard Reverb/Delay systems only require SAMPLE mode the Fractional/Mod modes are extensions allowing more advanced use Multiple Parallel/Cascaded Delay units with Feedback Damping Pre_Equaliser stage: Damp1, Damp2(pole) or BiQuad(engine) Combined, L/R(Stereo) or Separate Outputs Independent Delay Times(s,ms,samples) Feedback and Damping controls Master Volume - 2 modes Master Size (Delay times adjust) Master Decay (Feedback adjust) |
 2x_Delay_Bank: CPU 0.200%(typ) (Fractional/Interpolated: 0.220% / 0.320% All Times modulated) as above with 2 Delay units |
 4x_Delay_Bank: CPU 0.320%(typ) (Fractional/Interpolated: 0.360% / 0.560% All Times modulated) as above with 4 Delay units |
 8x_Delay_Bank: CPU 0.560%(typ) Fractional/Interpolated: 0.635% / 1.050% All Times modulated) as above with 8 Delay units |
All material on this site Copyright © 2003-2011 Chris Kerry
SynthEdit and the SynthEdit logo are the property of Jeff McClintock